497a3fbaa1
Fix --no-nls (2/5), prefer #if in libs
...
This is for consistency with system-wide gettext.h which is used
by some 3rd party libs. system-wide gettext uses `#if ENABLE_NLS`,
not #ifdef
2018-09-21 19:03:33 +02:00
79f01bc889
Initial changes needed for building Mixbus (with MSVC) as version 5
...
(Mixbus itself will probably need extra changes)
2018-09-10 07:14:59 +01:00
fb4ff01a18
better debug message with correct namespace for EventLoop::invalidate_request()
2018-08-07 10:44:56 -04:00
07466440c4
Move a couple of #undef's
...
'pbd/timing.h' now includes a call to 'std::numeric_limits<>::max()'
2018-05-19 09:28:30 +01:00
3534035091
Add a time-profiler with statistics
2018-05-17 22:15:07 +02:00
b9c9777b9a
When building with MSVC, allow for the fact that Mixbus and Ardour can be using different versions of the SESSION_FILE format
2018-02-15 09:03:32 +00:00
3856d525fb
Fix "open folder" for non-ASCII paths on Windows
2017-11-27 00:42:55 +01:00
c0dbe8eaaf
Move coreaudio_set_realtime_policy into libpbd
2017-10-30 16:31:38 +01:00
6e017eff22
Accommodate newly added/removed source(s) in our MSVC project (libpbd)
2017-10-27 13:08:32 +01:00
1aa96dc0a1
Add a RAII SpinLock (using boost's spinlock)
2017-10-26 22:33:46 +02:00
5c6e2b5802
Fix g_stat() for 64bit windows/mingw64
2017-10-18 17:54:39 +02:00
df83c0381e
Prepare support for compression levels (archive + flac)
2017-10-03 02:22:42 +02:00
bcdb3aec3a
Check in a few MSVC projects to accommodate the change from libtimecode to libtemporal
...
This is mostly to see if there'll be any problems when merging these changes into Mixbus. I'm guessing there'll be some conflicts in these projects (and a lot more to follow...)
2017-09-28 12:27:56 +01:00
506a29e2d3
Don't recurse into MacVST bundle-folders during plugin-scan
2017-09-21 20:02:11 +02:00
30b087ab3d
globally change all use of "frame" to refer to audio into "sample".
...
Generated by tools/f2s. Some hand-editing will be required in a few places to fix up comments related to timecode
and video in order to keep the legible
2017-09-18 12:39:17 -04:00
dc83dc7b58
Add TouchChanged signal (and re-indent)
2017-09-18 11:40:52 -04:00
7258c6334d
Namespace PBD::RingBuffer
...
class RingBuffer<> is a very generic name and should not pollute the
global namespace.
2017-09-16 16:37:29 +02:00
7d88091229
Avoid assert() when loading xml: Throw an XMLerror if attribute_value fails.
2017-08-30 10:23:34 -05:00
467c801ce8
Abstract definition of rt-scheduler policy
...
pthread-w32 does not support pthread_setschedparam() with
SCHED_FIFO and bails out. While pthread_create() simply ignores the policy
and sets the priority regadless.
This only affects ctrl-surface event-loops & AutomationWatch on Windows.
2017-08-29 20:35:36 +02:00
229c9584bf
Add a PBD API to set pthread priority
2017-08-29 17:25:23 +02:00
8374e23014
Add API to set thread-priority (for ctrl-surfaces)
2017-08-05 01:28:11 +02:00
cec84d242d
NO-OP: whitespace
2017-08-04 16:26:37 +02:00
1ed9564ffd
Graph profiling: allow to override max DSP thread count & calc avg.
2017-08-04 16:26:26 +02:00
ea48c56061
NO-OP: name-change (_list and _lock are also used in other places)
...
Derived classes need to explicitly specify namespace and class
to avoid ambiguities (even for private members)
2017-07-30 02:42:55 +02:00
bde3edf1c8
Make start_touch() truly idempotent
...
Also don't allow outsiders to call Controllable::set_touching()
2017-07-25 20:15:12 +02:00
ddf55c0d88
PBD::init() failing is fatal in main(), don't silently exit.
2017-07-03 14:45:41 +02:00
6f986173f3
Controllable focus notification API
...
This allows to inform control-surfaces about the current GUI
control-element. "Link" control-surface interaction to GUI focus.
2017-07-02 18:19:13 +02:00
6180c5a5fc
Accommodate newly introduced source(s) in our MSVC project (libpbd)
2017-06-22 17:59:16 +01:00
6ab970efa3
Remove LocaleGuard from PBD::Controllable state methods
...
These are no longer necessary as float <=> string conversion is handled by
locale independent PBD::to_string/string_to via XMLNode::get/set_property
2017-06-22 10:48:38 +10:00
940be0cbb9
compilation requires <stdint.h>
2017-06-21 14:19:21 -04:00
ce059e2d66
Remove internal_to_user/user_to_internal API
...
Also GainControl can just use the AutomationControl's implementation of
get_user_string()
2017-06-21 18:13:46 +02:00
e91b80eb85
Centralize control-parameter math functions in libpbd.
...
Functions formerly in ardour/util.h and some more functions.
The main motivation is libevoral which can use libpbd but not libardour.
The eventual goal is to consolidate various different interpolation,
scaling and deflection methods.
2017-06-21 18:12:01 +02:00
333e20a3a6
VCA/SlavableAutomationCtrl re-design:
...
* remember master-ctrl value on assignment & save with session
* Control/AutomationCtrl only stores ctrl's own value (w/o master)
* virtual AutomationControl::get_value () -> use SlavableAC method
* MasterRecord uses weak-ptr (fixes recursive ~Controllable() deadlock)
2017-06-12 02:26:23 +02:00
628e60f8fd
NO-OP: whitespace
2017-05-29 23:45:16 +02:00
Daniel Sheeler
d67436af3b
duplicate routes start off unsoloed to avoid issues related to upstream / downstream buses
2017-05-29 15:42:27 -05:00
1f094027c5
Remove normalization of property names from libpbd xml code
...
It may have been OK to add this code temporarily at this low level, but as it
was introduced in 2008, this change is made with the assumption that any
Sessions that were affected have been re-saved since then with corrected
property names and that "normalization" is no longer necessary.
Timing results before changes:
XMLTest::testPerfMediumXMLDocumentTiming
Create : Count: 10 Min: 30375 Max: 48253 Total: 431727 Avg: 43172 (43 msecs)
Write : Count: 10 Min: 42553 Max: 49163 Total: 453353 Avg: 45335 (45 msecs)
Read : Count: 10 Min: 70307 Max: 75987 Total: 734923 Avg: 73492 (73 msecs)
XMLTest::testPerfLargeXMLDocumentTiming
Create : Count: 10 Min: 154486 Max: 307856 Total: 2678989 Avg: 267898 (267 msecs)
Write : Count: 10 Min: 304273 Max: 343274 Total: 3169158 Avg: 316915 (316 msecs)
Read : Count: 10 Min: 496920 Max: 541394 Total: 5260410 Avg: 526041 (526 msecs)
Timing results after changes:
XMLTest::testPerfMediumXMLDocumentTiming
Create : Count: 10 Min: 21437 Max: 39749 Total: 348622 Avg: 34862 (34 msecs)
Write : Count: 10 Min: 42320 Max: 49989 Total: 446135 Avg: 44613 (44 msecs)
Read : Count: 10 Min: 63252 Max: 68389 Total: 660841 Avg: 66084 (66 msecs)
XMLTest::testPerfLargeXMLDocumentTiming
Create : Count: 10 Min: 113458 Max: 263225 Total: 2215595 Avg: 221559 (221 msecs)
Write : Count: 10 Min: 305439 Max: 339986 Total: 3150697 Avg: 315069 (315 msecs)
Read : Count: 10 Min: 447560 Max: 488121 Total: 4698903 Avg: 469890 (469 msecs)
2017-05-26 08:48:04 +10:00
5d683eaeca
NO-OP: whitespace and FSF address
2017-05-06 15:11:53 +02:00
ccd19ed061
extend PBD::ID API to allow construction and operator== using uint64_t
...
This is theoretically dangerous, because a PBD::ID is supposed to be unique, and this new constructor
cannot guarantee that. However, the same danger already exists with the std::string-based constructor
2017-05-05 18:56:25 +01:00
9c0ba3b3d5
Add mechanism to reset/lock semaphores
2017-04-22 23:06:22 +02:00
048af97b54
Use correct property names in PBD::Undo class
...
These have been "normalized" in XMLProperty ctor for many years, so this does
not change the Session format.
2017-04-21 12:46:04 +10:00
d19ec8ba46
Use hyphen for XML property names
...
These have been normalized/modified by the XMLProperty ctor for many years (~9)
so special treatment when reading properties should not be needed.
2017-04-21 12:46:04 +10:00
ffff31b832
Relax LocaleGuards
...
Arodur itself on longer depends on C/C++ locale for saving/loading sessions.
However, the Localeguard is kept for 3rd party plugins: Reset the C locale
to "C" to enforce consisten numerics and portable sessions as well
as verify that no plugin changes the C++ locale.
2017-04-20 22:12:33 +02:00
251db7a608
Changes needed for building Tim's new 'string_convert' stuff with MSVC (libpbd)
2017-04-19 17:25:51 +01:00
1ce58ad90a
Add additional PBD::string_to/to_string specializations for PBD::ID
2017-04-19 09:37:02 +10:00
4367b51e56
Remove PBD::to_string() function from pbd/convert.h
...
All uses of this function have now been replaced by PBD::to_string() from
pbd/string_convert.h
Remove this function so that it isn't mistakenly used to perform numeric to
string conversion when the result is being used for serialization as that only
works if the global C++ locale is set with LC_NUMERIC=C, which is the case
currently but may not be in the future.
2017-04-19 09:37:01 +10:00
ac8b5192cd
Remove now unused PBD::string_is_affirmative function
...
The equivalent function is now PBD::string_to<bool>
2017-04-19 09:36:59 +10:00
6e467153a0
Remove unused XMLNode::add_property methods
...
These are now unused and functionality is replaced by XMLNode::set_property
set_property is a better name as a node can only have properties with unique
names and the property will be set or reset(if it already exists). Changing the
name also makes it easier to transition and test the new API.
2017-04-19 09:36:57 +10:00
e4b1ece143
Use XMLNode::set_property API in xml tests
2017-04-19 09:36:57 +10:00
e01d074ad1
Use XMLNode::set_property in PBD::PropertyTemplate<T> class
2017-04-19 09:36:48 +10:00
32f5464490
Use XMLNode::get/set_property API in PBD::ConfigurationVariable class
2017-04-19 09:36:48 +10:00
