Johannes Mueller
3e124704b0
GR-based visualization in a-comp
2018-06-20 21:06:16 +02:00
Johannes Mueller
d29880da89
New attack and release behavior for a-comp
...
Details in http://tracker.ardour.org/view.php?id=7439
2018-06-20 21:06:16 +02:00
Johannes Mueller
112ac13b90
Don't use acomp->v_gainr outside LV2_EXTENDED ifdefs
2018-06-20 21:06:16 +02:00
Johannes Mueller
9a9df5a10b
Make the peak indication in the graph of a-expander green ...
...
... so that it has a different color than the expander curve
2018-05-12 19:49:18 +02:00
Johannes Mueller
46aa204eb8
Limit gain reduction of a-expander to 160 dB in order to ...
...
improve release behavior.
This slows down the release after events like single snare hits as, the gain
reduction only releases to 160 dB rather than to inf.
2018-05-12 19:49:18 +02:00
Johannes Mueller
40f12e1205
Visualize peak input in a-expander
2018-05-12 19:49:18 +02:00
Johannes Mueller
2dc96027d6
Add output control port to a-exp for input level
2018-05-12 19:49:18 +02:00
Johannes Mueller
8be06e6e63
Indicate input level in a-exp's inline display rather than output
2018-05-12 19:49:18 +02:00
Johannes Mueller
0eaf7b1e18
Increase the range of a-exp's ratio to make it usable like a gate
2018-05-12 19:49:18 +02:00
Johannes Mueller
0bc5a6f8e9
Make a-expander react probably on being disabled and enabled.
2018-05-12 19:49:18 +02:00
Johannes Mueller
2a5d56215c
New visualization of the compressor state in graph view
...
To properly visualize attack and release we calculate the input level out of
the gain reduction the output level threshold and ratio.
if (output_level >= threshold) { // no expansion
input_level = output_level
} else {
input_level = (gain_reduction - threshold * (1-ratio)) / ratio
}
2018-05-12 19:49:18 +02:00
Johannes Mueller
48c568187d
Fixed wrong initialization.
2018-05-12 19:49:18 +02:00
Johannes Mueller
37d2a7bc95
Adjust default parameters of a-expander
2018-05-12 19:49:18 +02:00
Johannes Mueller
bce3497d2a
Changed attack and release behavior
2018-05-12 19:49:18 +02:00
Johannes Mueller
3620122ad0
First draft of a-expander
2018-05-12 19:49:18 +02:00
b9c9777b9a
When building with MSVC, allow for the fact that Mixbus and Ardour can be using different versions of the SESSION_FILE format
2018-02-15 09:03:32 +00:00
6f019faaa0
Accommodate the change from libtimecode to libtemporal
2018-02-14 10:02:11 +00:00
52aa9bf848
a-comp: Fix typo with previous patch
2017-11-12 00:16:44 +11:00
f3efff4c7e
a-comp: Fix noise floor - asymptotics
2017-11-11 14:26:50 +11:00
4c58ada24b
Fix a-reverb bypass/enable
2017-11-08 01:38:17 +01:00
30b087ab3d
globally change all use of "frame" to refer to audio into "sample".
...
Generated by tools/f2s. Some hand-editing will be required in a few places to fix up comments related to timecode
and video in order to keep the legible
2017-09-18 12:39:17 -04:00
019f664356
Fix a-fluidsynth bank/program restore (during session load)
...
* set program in work-response, synchronous to run()
* properly store bank per channel (for replay)
2017-09-11 16:48:54 +02:00
fdbe22d005
a-fluidsynth: query current bank/program after loading .sf2
2017-09-10 16:06:16 +02:00
b7227415ad
a-fluidsynth mark session as modified if .sf2 changes
2017-09-08 23:35:00 +02:00
ba7bbd1d51
a-fluidsynth: implement LV2_BANKPATCH__notify
2017-09-08 23:35:00 +02:00
Johannes Mueller
6663a26755
Signal wish to show inline display in gui by lv2:optionalFeature
...
... in .ttl file rather than by extension_data() in code. That's more in the
spirit of LV2.
2017-07-31 21:31:23 +02:00
Johannes Mueller
e75db87bf6
Tweaking the a-comp inline display a bit. Make it more skinny.
2017-07-31 21:31:23 +02:00
Johannes Mueller
2716ce41e0
Indicate whether to show plugin's inline display in GUI
...
This is currently done by an extension data similarly to
LV2_INLINEDISPLAY__interface.
2017-07-31 21:31:23 +02:00
Johannes Mueller
59775df9be
Simplified inline display if the channel strip is not wide enough
...
If the width of the display area is below 200 px, we switch from the graph
display to displaying only two bars, one for output level and one for gain
reduction. In the bar mode we also visualize threshold and ratio.
2017-07-31 21:31:22 +02:00
Johannes Mueller
24cbb1b153
Honor attack and release parameters in a-comp's inline graph
2017-07-31 21:31:22 +02:00
Johannes Mueller
ccab32654b
Indicate gain reduction in a-comp
2017-07-31 21:31:22 +02:00
e65ff3fb4a
Show range -60 .. +10 dBFS in acomp's inline display
2017-07-31 21:31:22 +02:00
Johannes Mueller
85106d81a0
Set makeup to 0.f when bypassed also in stereo version
2017-07-31 21:31:22 +02:00
Johannes Mueller
29df879edd
Adjust the indication of the treshold value by the makup gain.
...
When lifting the compressor curve by the makeup gain value the actual
treshold (the level when the curve kinks in) is also lifted. Therefore we need
to adjust the dashed line indicating the threshold as well as the level when
the color gradient to show compression kicks in.
2017-07-31 21:31:22 +02:00
Johannes Mueller
dff4153024
Also the stereo version needs to set need_expose
2017-07-31 21:31:22 +02:00
Johannes Mueller
f68754b19d
Show a-comp's makeup grain in inline rendering
2017-07-31 21:31:22 +02:00
b42dbe9e4e
Sanitize printing of a-eq gain parameters
2017-07-22 17:41:35 +02:00
Johannes Mueller
0109042e7b
Increase range of a-comp#stereo release time
...
Like for the mono version in f52443e17e
2017-07-21 16:11:17 +02:00
Jelle van der Waa
b1cf27bed4
Fix duplicate ‘const’ declaration specifier
2017-07-12 12:09:59 +02:00
d08b81d33d
a-EQ: Revert one of the previous changes
...
One of the previous changes was not a typo, revert it.
2017-06-09 23:09:36 +10:00
ca815acd61
a-EQ: DSP bugfix
...
Previously there were large spurious spikes in the signal when
the bandwidth parameter was adjusted on a pure sine tone
for the peaking circuits. This has been *greatly* reduced if not
eliminated by fixing a typo in two of the equations.
2017-06-08 02:04:12 +10:00
Nil Geisweiller
a07ca8fa3e
Fix a-EQ when parameter changes are very slow
...
If the parameters change too slowly the filter may never get updated. Indeed,
in spite of v_f0, v_g or v_bw being updated, set_params may never be called,
thus v_filter never updated.
2017-06-06 14:44:19 +02:00
0b6e2d1e46
Improve a-delay to follow tempo-ramps & BPM changes
...
This is a bit of a hotfix, not a proper solution
2017-03-11 23:10:44 +01:00
8f2a5c01dd
fix a-reverb, cut tail on deactivate, plug memory-leak
2017-03-08 23:04:16 +01:00
2a7ad06e79
fix a-fluidsynth bank select (use MMA style, 14 bit MSB/LSB)
2017-01-31 10:44:07 +01:00
9a13a563d0
fix a-fluidsynth midnam bank select
2017-01-31 00:43:43 +01:00
9a46d593cb
a-fluidsynth process events even when no sf2 is loaded.
...
Keep track of program-changes, re-apply Bank/PGM once the
soundfont is loaded. fluidsynth itself keeps track of CCs.
2016-12-07 19:48:52 +01:00
2d37392f1a
a-fluid synth: label Reverb & Chorus sends.
...
Also globally enable Reverb + Chorus FX (so that sends work by default)
2016-12-06 22:56:04 +01:00
f26ed23fd9
a-fluid synth: list all bank/programs
2016-12-06 17:00:12 +01:00
9c20892c27
Turn a-fluidsynth into C++
2016-12-06 17:00:12 +01:00
