13
0
livetrax/gtk2_ardour/volume_controller.cc

281 lines
8.4 KiB
C++
Raw Normal View History

/*
Copyright (C) 1998-2007 Paul Davis
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
$Id: volume_controller.cc,v 1.4 2000/05/03 15:54:21 pbd Exp $
*/
#include <algorithm>
#include <string.h>
#include <limits.h>
#include "pbd/controllable.h"
#include "pbd/stacktrace.h"
#include "gtkmm2ext/gui_thread.h"
#include "ardour/dB.h"
#include "ardour/rc_configuration.h"
#include "ardour/utils.h"
#include "volume_controller.h"
using namespace Gtk;
VolumeController::VolumeController (Glib::RefPtr<Gdk::Pixbuf> p,
boost::shared_ptr<PBD::Controllable> c,
double def,
double step,
double page,
bool with_numeric,
int subw,
int subh,
bool linear)
: MotionFeedback (p, MotionFeedback::Rotary, c, def, step, page, "", with_numeric, subw, subh)
, _linear (linear)
{
set_print_func (VolumeController::_dB_printer, this);
value->set_width_chars (8);
}
void
VolumeController::_dB_printer (char buf[32], const boost::shared_ptr<PBD::Controllable>& c, void* arg)
{
VolumeController* vc = reinterpret_cast<VolumeController*>(arg);
vc->dB_printer (buf, c);
}
void
VolumeController::dB_printer (char buf[32], const boost::shared_ptr<PBD::Controllable>& c)
{
if (c) {
2015-10-05 10:17:49 -04:00
if (_linear) {
double val = accurate_coefficient_to_dB (c->get_value());
if (step_inc < 1.0) {
if (val >= 0.0) {
snprintf (buf, 32, "+%5.2f dB", val);
} else {
snprintf (buf, 32, "%5.2f dB", val);
}
} else {
if (val >= 0.0) {
snprintf (buf, 32, "+%2ld dB", lrint (val));
} else {
snprintf (buf, 32, "%2ld dB", lrint (val));
}
}
} else {
2015-10-05 10:17:49 -04:00
double dB = accurate_coefficient_to_dB (c->get_value());
if (step_inc < 1.0) {
if (dB >= 0.0) {
snprintf (buf, 32, "+%5.2f dB", dB);
} else {
snprintf (buf, 32, "%5.2f dB", dB);
}
} else {
if (dB >= 0.0) {
snprintf (buf, 32, "+%2ld dB", lrint (dB));
} else {
snprintf (buf, 32, "%2ld dB", lrint (dB));
}
}
}
} else {
snprintf (buf, 32, "--");
}
}
double
VolumeController::to_control_value (double display_value)
{
double v;
/* display value is always clamped to 0.0 .. 1.0 */
display_value = std::max (0.0, std::min (1.0, display_value));
if (_linear) {
v = _controllable->lower() + ((_controllable->upper() - _controllable->lower()) * display_value);
} else {
2014-06-25 15:03:47 -04:00
v = ARDOUR::slider_position_to_gain_with_max (display_value, ARDOUR::Config->get_max_gain());
}
return v;
}
double
VolumeController::to_display_value (double control_value)
{
double v;
if (_linear) {
v = (control_value - _controllable->lower ()) / (_controllable->upper() - _controllable->lower());
} else {
2014-06-25 15:03:47 -04:00
v = ARDOUR::gain_to_slider_position_with_max (control_value, _controllable->upper());
}
return v;
}
double
VolumeController::adjust (double control_delta)
{
double v;
if (!_linear) {
/* we map back into the linear/fractional slider position,
* because this kind of control goes all the way down
* to -inf dB, and we want this occur in a reasonable way in
* terms of user interaction. if we leave the adjustment in the
* gain coefficient domain (or dB domain), the lower end of the
* control range (getting close to -inf dB) takes forever.
*/
#if 0
/* convert to linear/fractional slider position domain */
2014-06-25 15:03:47 -04:00
v = ARDOUR::gain_to_slider_position_with_max (_controllable->get_value (), _controllable->upper());
/* increment in this domain */
v += control_delta;
/* clamp to appropriate range for linear/fractional slider domain */
v = std::max (0.0, std::min (1.0, v));
/* convert back to gain coefficient domain */
2014-06-25 15:03:47 -04:00
v = ARDOUR::slider_position_to_gain_with_max (v, _controllable->upper());
/* clamp in controller domain */
v = std::max (_controllable->lower(), std::min (_controllable->upper(), v));
/* convert to dB domain */
v = accurate_coefficient_to_dB (v);
/* round up/down to nearest 0.1dB */
if (control_delta > 0.0) {
v = ceil (v * 10.0) / 10.0;
} else {
v = floor (v * 10.0) / 10.0;
}
/* and return it */
return dB_to_coefficient (v);
#else
/* ^^ Above algorithm is not symmetric. Scroll up to steps, scoll down two steps, -> different gain.
*
* see ./libs/gtkmm2ext/gtkmm2ext/motionfeedback.h and gtk2_ardour/monitor_section.cc:
* min-delta (corr) = MIN(0.01 * page inc, 1 * size_inc) // (gain_control uses size_inc=0.01, page_inc=0.1)
* range corr: 0..2 -> -inf..+6dB
* step sizes [0.01, 0.10, 0.20] * page_inc, [1,2,10,100] * step_inc. [1,2,10,100] * page_inc
*
* 0.001, 0.01, 0.02, 0.1, .2, 1, 10
* -> 1k steps between -inf..0dB
* -> 1k steps between 0..+dB
*
* IOW:
* the range is from *0 (-inf dB) to *2.0 ( +6dB)
* the knob is configured to to go in steps of 0.001 - that's 2000 steps between 0 and 2.
* or 1000 steps between 0 and 1.
*
* we cannot round to .01dB steps because
* There are only 600 possible values between +0db and +6dB when going in steps of .01dB
* 1000/600 = 1.66666...
*
******
* idea: make the 'controllable use a fixed range of dB.
* do a 1:1 mapping between values. :et's stick with the range of 0..2 in 0.001 steps
*
* "-80" becomes 0 and "+6" becomes 2000. (NB +6dB is actually 1995, but we clamp that to the top)
*
* This approach is better (more consistet) but not good. At least the dial does not annoy me as much
* anymore as it did before.
*
* const double stretchfactor = rint((_controllable->upper() - _controllable->lower()) / 0.001); // 2000;
* const double logfactor = stretchfactor / ((20.0 * log10( _controllable->upper())) + 80.0); // = 23.250244732
*/
v = _controllable->get_value ();
/* assume everything below -60dB is silent (.001 ^= -60dB)
* but map range -80db..+6dB to a scale of 0..2000
* 80db was motivated because 2000/((20.0 * log(1)) + 80.0) is an integer value. "0dB" is included on the scale.
* but this leaves a dead area at the bottom of the meter..
*/
double arange = (v >= 0.001) ? ( ((20.0 * log10(v)) + 80.0) * 23.250244732 ) : ( 0 );
/* add the delta */
v = rint(arange) + rint(control_delta * 1000.0); // (min steps is 1.0/0.001 == 1000.0)
/* catch bottom -80..-60 db in one step */
if (v < 466) v = (control_delta > 0) ? 0.001 : 0;
/* reverse operation (pow(10, .05 * ((v / 23.250244732) - 80.0)))
* can be simplified to :*/
else v = pow(10, (v * 0.00215051499) - 4.0);
/* clamp value in coefficient domain */
v = std::max (_controllable->lower(), std::min (_controllable->upper(), v));
return v;
#endif
} else {
double mult;
if (control_delta < 0.0) {
mult = -1.0;
} else {
mult = 1.0;
}
if (fabs (control_delta) < 0.05) {
control_delta = mult * 0.05;
} else {
control_delta = mult * 0.1;
}
v = _controllable->get_value();
if (v == 0.0) {
/* if we don't special case this, we can't escape from
the -infinity dB black hole.
*/
if (control_delta > 0.0) {
v = dB_to_coefficient (-100 + control_delta);
}
} else {
static const double dB_minus_200 = dB_to_coefficient (-200.0);
static const double dB_minus_100 = dB_to_coefficient (-100.0);
static const double dB_minus_50 = dB_to_coefficient (-50.0);
static const double dB_minus_20 = dB_to_coefficient (-20.0);
if (control_delta < 0 && v < dB_minus_200) {
v = 0.0;
} else {
/* non-linear scaling as the dB level gets low
so that we can hit -inf and get back out of
it appropriately.
*/
if (v < dB_minus_100) {
control_delta *= 1000.0;
} else if (v < dB_minus_50) {
control_delta *= 100.0;
} else if (v < dB_minus_20) {
control_delta *= 10.0;
}
v = accurate_coefficient_to_dB (v);
v += control_delta;
v = dB_to_coefficient (v);
}
}
return std::max (_controllable->lower(), std::min (_controllable->upper(), v));
}
}