ardour/livetrax
13
0
Fork 0
Code
32c1c8a1c7
livetrax/ardour.rc.in

50 lines
2.3 KiB
Plaintext
Raw Normal View History

Set UTF-8 encoding for ardour.rc.in and ardour_system.rc. git-svn-id: svn://localhost/ardour2/trunk@1073 d708f5d6-7413-0410-9779-e7cbd77b26cf
2006-11-05 13:50:19 -05:00
<?xml version="1.0" encoding="UTF-8"?>
Initial revision git-svn-id: svn://localhost/trunk/ardour2@4 d708f5d6-7413-0410-9779-e7cbd77b26cf
2005-05-13 16:47:18 -04:00
<Ardour>
Fix various MIDI control and installation issues: * Install ardour3_ui_default.conf to system config dir * Set -DDATA_DIR etc. defines to proper absolute paths * Set default MIDI control port name to "control" (it was "control" some places, "default" other, so the generic MIDI control surface didn't work. The real problem here is probably that the name is hardcoded in the surface code, ick) * Install surfaces to correct system directory * Generate and install ardour_system.rc User POV: * Installed versions not run from the source directory discover configuration files and surfaces, and generally work * Building and/or starting a fresh copy of ardour3 with no pre-existing configuration will run an ardour with a single MIDI "control" port, which you can plug a surface into and control MMC and controllers and such (after turning on the generic MIDI surface, which IMO should be loaded by default anyway, especially since it's no longer in a menu) git-svn-id: svn://localhost/ardour2/branches/3.0@5833 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-20 19:43:19 -04:00
<MIDI-port tag="@MIDITAG@" device="ardour" type="@MIDITYPE@" mode="duplex"/>
Initial revision git-svn-id: svn://localhost/trunk/ardour2@4 d708f5d6-7413-0410-9779-e7cbd77b26cf
2005-05-13 16:47:18 -04:00
<Config>
<Option name="minimum-disk-io-bytes" value="262144"/>
<Option name="track-buffer-seconds" value="5.000000"/>
* libardour uses ARDOUR::nframes_t and ARDOUR::nframes64_t explicitly in headers * use explicit operator<< and operator>> that in turn use PBD::EnumWriter when serializing and deserializing to/from rc files * adds scrolling in mixer window (from 2.X) * BBT math stuff - untested, but basically operational * move LocaleGuard into its own file(s) in libs/pbd * Tempo now uses nframes64_t everywhere (except for sample rate values) * as in 2.X, use mkstemp and hack to avoid temp file nonsense, and remove erroneous free() from disk stats output git-svn-id: svn://localhost/ardour2/branches/3.0@5961 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:36:40 -04:00
<Option name="mute-affects-pre-fader" value="1"/>
<Option name="mute-affects-post-fader" value="1"/>
<Option name="mute-affects-control-outs" value="1"/>
<Option name="mute-affects-main-outs" value="1"/>
another small commit and a reminder: rev 5961 or this one requires you to remove ~/.ardour3/ardour.rc git-svn-id: svn://localhost/ardour2/branches/3.0@5962 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:38:00 -04:00
<Option name="monitoring-model" value="ExternalMonitoring"/>
* libardour uses ARDOUR::nframes_t and ARDOUR::nframes64_t explicitly in headers * use explicit operator<< and operator>> that in turn use PBD::EnumWriter when serializing and deserializing to/from rc files * adds scrolling in mixer window (from 2.X) * BBT math stuff - untested, but basically operational * move LocaleGuard into its own file(s) in libs/pbd * Tempo now uses nframes64_t everywhere (except for sample rate values) * as in 2.X, use mkstemp and hack to avoid temp file nonsense, and remove erroneous free() from disk stats output git-svn-id: svn://localhost/ardour2/branches/3.0@5961 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:36:40 -04:00
<Option name="solo-latch" value="1"/>
Fix various MIDI control and installation issues: * Install ardour3_ui_default.conf to system config dir * Set -DDATA_DIR etc. defines to proper absolute paths * Set default MIDI control port name to "control" (it was "control" some places, "default" other, so the generic MIDI control surface didn't work. The real problem here is probably that the name is hardcoded in the surface code, ick) * Install surfaces to correct system directory * Generate and install ardour_system.rc User POV: * Installed versions not run from the source directory discover configuration files and surfaces, and generally work * Building and/or starting a fresh copy of ardour3 with no pre-existing configuration will run an ardour with a single MIDI "control" port, which you can plug a surface into and control MMC and controllers and such (after turning on the generic MIDI surface, which IMO should be loaded by default anyway, especially since it's no longer in a menu) git-svn-id: svn://localhost/ardour2/branches/3.0@5833 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-20 19:43:19 -04:00
<Option name="mtc-port" value="@MIDITAG@"/>
<Option name="mmc-port" value="@MIDITAG@"/>
<Option name="midi-port" value="@MIDITAG@"/>
* libardour uses ARDOUR::nframes_t and ARDOUR::nframes64_t explicitly in headers * use explicit operator<< and operator>> that in turn use PBD::EnumWriter when serializing and deserializing to/from rc files * adds scrolling in mixer window (from 2.X) * BBT math stuff - untested, but basically operational * move LocaleGuard into its own file(s) in libs/pbd * Tempo now uses nframes64_t everywhere (except for sample rate values) * as in 2.X, use mkstemp and hack to avoid temp file nonsense, and remove erroneous free() from disk stats output git-svn-id: svn://localhost/ardour2/branches/3.0@5961 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:36:40 -04:00
<Option name="jack-time-master" value="1"/>
<Option name="trace-midi-input" value="0"/>
<Option name="trace-midi-output" value="0"/>
<Option name="plugins-stop-with-transport" value="0"/>
<Option name="no-sw-monitoring" value="0"/>
<Option name="stop-recording-on-xrun" value="0"/>
<Option name="create-xrun-marker" value="1"/>
<Option name="stop-at-session-end" value="0"/>
<Option name="auto-xfade" value="1"/>
fixes for crossfade views, crossfades and undo/redo. added default crossfade settings to ardour.rc.in git-svn-id: svn://localhost/ardour2/trunk@994 d708f5d6-7413-0410-9779-e7cbd77b26cf
2006-10-20 12:09:42 -04:00
<Option name="crossfades-active" value="1"/>
<Option name="crossfades-visible" value="1"/>
* libardour uses ARDOUR::nframes_t and ARDOUR::nframes64_t explicitly in headers * use explicit operator<< and operator>> that in turn use PBD::EnumWriter when serializing and deserializing to/from rc files * adds scrolling in mixer window (from 2.X) * BBT math stuff - untested, but basically operational * move LocaleGuard into its own file(s) in libs/pbd * Tempo now uses nframes64_t everywhere (except for sample rate values) * as in 2.X, use mkstemp and hack to avoid temp file nonsense, and remove erroneous free() from disk stats output git-svn-id: svn://localhost/ardour2/branches/3.0@5961 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:36:40 -04:00
<Option name="xfade-model" value="FullCrossfade"/>
<Option name="no-new-session-dialog" value="1"/>
<Option name="timecode-source-is-synced" value="1"/>
Fix various MIDI control and installation issues: * Install ardour3_ui_default.conf to system config dir * Set -DDATA_DIR etc. defines to proper absolute paths * Set default MIDI control port name to "control" (it was "control" some places, "default" other, so the generic MIDI control surface didn't work. The real problem here is probably that the name is hardcoded in the surface code, ick) * Install surfaces to correct system directory * Generate and install ardour_system.rc User POV: * Installed versions not run from the source directory discover configuration files and surfaces, and generally work * Building and/or starting a fresh copy of ardour3 with no pre-existing configuration will run an ardour with a single MIDI "control" port, which you can plug a surface into and control MMC and controllers and such (after turning on the generic MIDI surface, which IMO should be loaded by default anyway, especially since it's no longer in a menu) git-svn-id: svn://localhost/ardour2/branches/3.0@5833 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-20 19:43:19 -04:00
<Option name="auditioner-left-out" value="@JACK_INPUT@1"/>
<Option name="auditioner-right-out" value="@JACK_INPUT@2"/>
Initial revision git-svn-id: svn://localhost/trunk/ardour2@4 d708f5d6-7413-0410-9779-e7cbd77b26cf
2005-05-13 16:47:18 -04:00
<Option name="quieten-at-speed" value="1.000000"/>
* libardour uses ARDOUR::nframes_t and ARDOUR::nframes64_t explicitly in headers * use explicit operator<< and operator>> that in turn use PBD::EnumWriter when serializing and deserializing to/from rc files * adds scrolling in mixer window (from 2.X) * BBT math stuff - untested, but basically operational * move LocaleGuard into its own file(s) in libs/pbd * Tempo now uses nframes64_t everywhere (except for sample rate values) * as in 2.X, use mkstemp and hack to avoid temp file nonsense, and remove erroneous free() from disk stats output git-svn-id: svn://localhost/ardour2/branches/3.0@5961 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:36:40 -04:00
<Option name="use-vst" value="1"/>
<Option name="use-tranzport" value="1"/>
Merged changes from trunk 1699:1751 into 2.1-staging git-svn-id: svn://localhost/ardour2/branches/2.1-staging@1752 d708f5d6-7413-0410-9779-e7cbd77b26cf
2007-04-26 16:54:31 -04:00
<Option name="disk-choice-space-threshold" value="57600000"/>
fix import/embed of multichannel audiofiles, as per #1433 git-svn-id: svn://localhost/ardour2/trunk@1386 d708f5d6-7413-0410-9779-e7cbd77b26cf
2007-01-25 12:42:19 -05:00
<Option name="destructive-xfade-msecs" value="20"/>
Merged changes from trunk 1699:1751 into 2.1-staging git-svn-id: svn://localhost/ardour2/branches/2.1-staging@1752 d708f5d6-7413-0410-9779-e7cbd77b26cf
2007-04-26 16:54:31 -04:00
<Option name="periodic-safety-backups" value="1"/>
<Option name="periodic-safety-backup-interval" value="120"/>
Merge with 2.0-ongoing R2885. Fix loading of 2.0 sessions. git-svn-id: svn://localhost/ardour2/trunk@2904 d708f5d6-7413-0410-9779-e7cbd77b26cf
2008-01-12 18:45:50 -05:00
<Option name="show-track-meters" value="1"/>
Fix various MIDI control and installation issues: * Install ardour3_ui_default.conf to system config dir * Set -DDATA_DIR etc. defines to proper absolute paths * Set default MIDI control port name to "control" (it was "control" some places, "default" other, so the generic MIDI control surface didn't work. The real problem here is probably that the name is hardcoded in the surface code, ick) * Install surfaces to correct system directory * Generate and install ardour_system.rc User POV: * Installed versions not run from the source directory discover configuration files and surfaces, and generally work * Building and/or starting a fresh copy of ardour3 with no pre-existing configuration will run an ardour with a single MIDI "control" port, which you can plug a surface into and control MMC and controllers and such (after turning on the generic MIDI surface, which IMO should be loaded by default anyway, especially since it's no longer in a menu) git-svn-id: svn://localhost/ardour2/branches/3.0@5833 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-20 19:43:19 -04:00
<Option name="default-narrow_ms" value="0"/>
* libardour uses ARDOUR::nframes_t and ARDOUR::nframes64_t explicitly in headers * use explicit operator<< and operator>> that in turn use PBD::EnumWriter when serializing and deserializing to/from rc files * adds scrolling in mixer window (from 2.X) * BBT math stuff - untested, but basically operational * move LocaleGuard into its own file(s) in libs/pbd * Tempo now uses nframes64_t everywhere (except for sample rate values) * as in 2.X, use mkstemp and hack to avoid temp file nonsense, and remove erroneous free() from disk stats output git-svn-id: svn://localhost/ardour2/branches/3.0@5961 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-28 17:36:40 -04:00
<Option name="timecode-format" value="timecode_30"/>
Fix various MIDI control and installation issues: * Install ardour3_ui_default.conf to system config dir * Set -DDATA_DIR etc. defines to proper absolute paths * Set default MIDI control port name to "control" (it was "control" some places, "default" other, so the generic MIDI control surface didn't work. The real problem here is probably that the name is hardcoded in the surface code, ick) * Install surfaces to correct system directory * Generate and install ardour_system.rc User POV: * Installed versions not run from the source directory discover configuration files and surfaces, and generally work * Building and/or starting a fresh copy of ardour3 with no pre-existing configuration will run an ardour with a single MIDI "control" port, which you can plug a surface into and control MMC and controllers and such (after turning on the generic MIDI surface, which IMO should be loaded by default anyway, especially since it's no longer in a menu) git-svn-id: svn://localhost/ardour2/branches/3.0@5833 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-20 19:43:19 -04:00
<Option name="font-scale" value="102400"/>
make 3.0 catch up with transport and other changes in 2.X (hand applied, not merged) git-svn-id: svn://localhost/ardour2/branches/3.0@5989 d708f5d6-7413-0410-9779-e7cbd77b26cf
2009-10-30 14:14:25 -04:00
<Option name="seamless-loop" value="1"/>
Initial revision git-svn-id: svn://localhost/trunk/ardour2@4 d708f5d6-7413-0410-9779-e7cbd77b26cf
2005-05-13 16:47:18 -04:00
</Config>
<extra>
<Keyboard edit-button="3" edit-modifier="4" delete-button="3" delete-modifier="1" snap-modifier="32"/>
</extra>
</Ardour>
Merged changes from trunk 1699:1751 into 2.1-staging git-svn-id: svn://localhost/ardour2/branches/2.1-staging@1752 d708f5d6-7413-0410-9779-e7cbd77b26cf
2007-04-26 16:54:31 -04:00
Copy Permalink