13
0
livetrax/gtk2_ardour/midi_channel_selector.cc

893 lines
27 KiB
C++
Raw Normal View History

/*
* Copyright (C) 2008-2015 David Robillard <d@drobilla.net>
* Copyright (C) 2008 Hans Baier <hansfbaier@googlemail.com>
* Copyright (C) 2009-2011 Carl Hetherington <carl@carlh.net>
* Copyright (C) 2009-2016 Paul Davis <paul@linuxaudiosystems.com>
* Copyright (C) 2015 Robin Gareus <robin@gareus.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <algorithm>
#include <sstream>
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
#include <gtkmm/separator.h>
#include <gtkmm/box.h>
#include <gtkmm/label.h>
#include <gtkmm/togglebutton.h>
#include <gtkmm/radiobutton.h>
#include <gtkmm/table.h>
#include "pbd/compose.h"
#include "pbd/ffs.h"
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
#include "gtkmm2ext/gtk_ui.h"
#include "gtkmm2ext/gui_thread.h"
#include "gtkmm2ext/utils.h"
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
#include "ardour/midi_track.h"
#include "midi_channel_selector.h"
#include "rgb_macros.h"
#include "pbd/i18n.h"
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
using namespace std;
using namespace Gtk;
using namespace ARDOUR;
MidiChannelSelector::MidiChannelSelector(int n_rows, int n_columns, int start_row, int start_column)
: Table(std::max(4, std::max(n_rows, start_row + 4)),
std::max(4, std::max(n_columns, start_column + 4)),
true)
, _recursion_counter(0)
{
property_column_spacing() = 0;
property_row_spacing() = 0;
uint8_t channel_nr = 0;
for (int row = 0; row < 4; ++row) {
for (int column = 0; column < 4; ++column) {
ostringstream channel;
channel << int(++channel_nr);
_button_labels[row][column].set_text(channel.str());
_button_labels[row][column].set_justify(JUSTIFY_RIGHT);
_buttons[row][column].add(_button_labels[row][column]);
_buttons[row][column].signal_toggled().connect(
sigc::bind(
sigc::mem_fun(this, &MidiChannelSelector::button_toggled),
&_buttons[row][column],
channel_nr - 1));
_buttons[row][column].set_widget_name (X_("MidiChannelSelectorButton"));
_buttons[row][column].signal_button_release_event().connect(
sigc::mem_fun(this, &MidiChannelSelector::was_clicked), false);
int table_row = start_row + row;
int table_column = start_column + column;
attach(_buttons[row][column], table_column, table_column + 1, table_row, table_row + 1);
}
}
}
MidiChannelSelector::~MidiChannelSelector()
{
}
bool
MidiChannelSelector::was_clicked (GdkEventButton*)
{
2017-07-01 12:42:24 -04:00
clicked ();
return false;
}
void
MidiChannelSelector::set_channel_colors(const uint32_t new_channel_colors[16])
{
for (int row = 0; row < 4; ++row) {
for (int column = 0; column < 4; ++column) {
char color_normal[8];
char color_active[8];
snprintf(color_normal, 8, "#%x", UINT_INTERPOLATE(new_channel_colors[row * 4 + column], 0x000000ff, 0.6));
snprintf(color_active, 8, "#%x", new_channel_colors[row * 4 + column]);
_buttons[row][column].modify_bg(STATE_NORMAL, Gdk::Color(color_normal));
_buttons[row][column].modify_bg(STATE_ACTIVE, Gdk::Color(color_active));
}
}
}
void
MidiChannelSelector::set_default_channel_color()
{
for (int row = 0; row < 4; ++row) {
for (int column = 0; column < 4; ++column) {
_buttons[row][column].unset_fg (STATE_NORMAL);
_buttons[row][column].unset_fg (STATE_ACTIVE);
_buttons[row][column].unset_bg (STATE_NORMAL);
_buttons[row][column].unset_bg (STATE_ACTIVE);
}
}
}
SingleMidiChannelSelector::SingleMidiChannelSelector(uint8_t active_channel)
: MidiChannelSelector()
{
_last_active_button = 0;
ToggleButton* button = &_buttons[active_channel / 4][active_channel % 4];
_active_channel = active_channel;
button->set_active(true);
_last_active_button = button;
}
void
SingleMidiChannelSelector::button_toggled(ToggleButton* button, uint8_t channel)
{
++_recursion_counter;
if (_recursion_counter == 1) {
// if the current button is active it must
// be different from the first one
if (button->get_active()) {
if (_last_active_button) {
_last_active_button->set_active(false);
_active_channel = channel;
_last_active_button = button;
channel_selected.emit(channel);
}
} else {
// if not, the user pressed the already active button
button->set_active(true);
_active_channel = channel;
}
}
--_recursion_counter;
}
MidiMultipleChannelSelector::MidiMultipleChannelSelector(ChannelMode mode, uint16_t mask)
: MidiChannelSelector(4, 6, 0, 0)
, _channel_mode(mode)
{
_select_all.add(*manage(new Label(_("All"))));
_select_all.signal_clicked().connect(
sigc::bind(sigc::mem_fun(this, &MidiMultipleChannelSelector::select_all), true));
_select_none.add(*manage(new Label(_("None"))));
_select_none.signal_clicked().connect(
sigc::bind(sigc::mem_fun(this, &MidiMultipleChannelSelector::select_all), false));
_invert_selection.add(*manage(new Label(_("Invert"))));
_invert_selection.signal_clicked().connect(
sigc::mem_fun(this, &MidiMultipleChannelSelector::invert_selection));
_force_channel.add(*manage(new Label(_("Force"))));
_force_channel.signal_toggled().connect(
sigc::mem_fun(this, &MidiMultipleChannelSelector::force_channels_button_toggled));
set_homogeneous(false);
attach(*manage(new VSeparator()), 4, 5, 0, 4, SHRINK, FILL, 0, 0);
//set_row_spacing(4, -5);
attach(_select_all, 5, 6, 0, 1);
attach(_select_none, 5, 6, 1, 2);
attach(_invert_selection, 5, 6, 2, 3);
attach(_force_channel, 5, 6, 3, 4);
set_selected_channels(mask);
}
MidiMultipleChannelSelector::~MidiMultipleChannelSelector()
{
mode_changed.clear();
}
void
MidiMultipleChannelSelector::set_channel_mode(ChannelMode mode, uint16_t mask)
{
switch (mode) {
case AllChannels:
_force_channel.set_active(false);
set_selected_channels(0xFFFF);
break;
case FilterChannels:
_force_channel.set_active(false);
set_selected_channels(mask);
break;
case ForceChannel:
_force_channel.set_active(true);
for (uint16_t i = 0; i < 16; i++) {
ToggleButton* button = &_buttons[i / 4][i % 4];
button->set_active(i == mask);
}
}
}
uint16_t
MidiMultipleChannelSelector::get_selected_channels() const
{
uint16_t selected_channels = 0;
for (uint16_t i = 0; i < 16; i++) {
const ToggleButton* button = &_buttons[i / 4][i % 4];
if (button->get_active()) {
selected_channels |= (1L << i);
}
}
return selected_channels;
}
void
MidiMultipleChannelSelector::set_selected_channels(uint16_t selected_channels)
{
for (uint16_t i = 0; i < 16; i++) {
ToggleButton* button = &_buttons[i / 4][i % 4];
if (selected_channels & (1L << i)) {
button->set_active(true);
} else {
button->set_active(false);
}
}
}
void
MidiMultipleChannelSelector::button_toggled(ToggleButton */*button*/, uint8_t channel)
{
++_recursion_counter;
if (_recursion_counter == 1) {
if (_channel_mode == ForceChannel) {
mode_changed.emit(_channel_mode, channel);
set_selected_channels(1 << channel);
} else {
mode_changed.emit(_channel_mode, get_selected_channels());
}
}
--_recursion_counter;
}
void
MidiMultipleChannelSelector::force_channels_button_toggled()
{
if (_force_channel.get_active()) {
_channel_mode = ForceChannel;
bool found_first_active = false;
// leave only the first button enabled
uint16_t active_channel = 0;
for (int i = 0; i <= 15; i++) {
ToggleButton* button = &_buttons[i / 4][i % 4];
if (button->get_active()) {
if (found_first_active) {
++_recursion_counter;
button->set_active(false);
--_recursion_counter;
} else {
found_first_active = true;
active_channel = i;
}
}
}
if (!found_first_active) {
_buttons[0][0].set_active(true);
}
_select_all.set_sensitive(false);
_select_none.set_sensitive(false);
_invert_selection.set_sensitive(false);
mode_changed.emit(_channel_mode, active_channel);
} else {
_channel_mode = FilterChannels;
_select_all.set_sensitive(true);
_select_none.set_sensitive(true);
_invert_selection.set_sensitive(true);
mode_changed.emit(FilterChannels, get_selected_channels());
}
}
void
MidiMultipleChannelSelector::select_all(bool on)
{
if (_channel_mode == ForceChannel)
return;
++_recursion_counter;
for (uint16_t i = 0; i < 16; i++) {
ToggleButton* button = &_buttons[i / 4][i % 4];
button->set_active(on);
}
--_recursion_counter;
mode_changed.emit(_channel_mode, get_selected_channels());
}
void
MidiMultipleChannelSelector::invert_selection(void)
{
if (_channel_mode == ForceChannel)
return;
++_recursion_counter;
for (uint16_t i = 0; i < 16; i++) {
ToggleButton* button = &_buttons[i / 4][i % 4];
if (button->get_active()) {
button->set_active(false);
} else {
button->set_active(true);
}
}
--_recursion_counter;
mode_changed.emit(_channel_mode, get_selected_channels());
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
/*-----------------------------------------*/
MidiChannelSelectorWindow::MidiChannelSelectorWindow (std::shared_ptr<MidiTrack> mt)
: ArdourWindow (_("MIDI Channel Control"))
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
, track (mt)
, playback_all_button (playback_button_group, _("Playback all channels"))
, playback_filter_button (playback_button_group, _("Play only selected channels"))
, playback_force_button (playback_button_group, _("Use a single fixed channel for all playback"))
, capture_all_button (capture_button_group, _("Record all channels"))
, capture_filter_button (capture_button_group, _("Record only selected channels"))
, capture_force_button (capture_button_group, _("Force all channels to 1 channel"))
, last_drawn_capture_mode (AllChannels)
, last_drawn_playback_mode (AllChannels)
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
{
build ();
playback_mode_changed ();
capture_mode_changed ();
playback_mask_changed ();
capture_mask_changed ();
track->playback_filter().ChannelMaskChanged.connect (*this, MISSING_INVALIDATOR, boost::bind (&MidiChannelSelectorWindow::playback_mask_changed, this), gui_context());
track->playback_filter().ChannelModeChanged.connect (*this, MISSING_INVALIDATOR, boost::bind (&MidiChannelSelectorWindow::playback_mode_changed, this), gui_context());
track->capture_filter().ChannelMaskChanged.connect (*this, MISSING_INVALIDATOR, boost::bind (&MidiChannelSelectorWindow::capture_mask_changed, this), gui_context());
track->capture_filter().ChannelModeChanged.connect (*this, MISSING_INVALIDATOR, boost::bind (&MidiChannelSelectorWindow::capture_mode_changed, this), gui_context());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
MidiChannelSelectorWindow::~MidiChannelSelectorWindow()
{
}
void
MidiChannelSelectorWindow::build ()
{
VBox* vpacker;
HBox* capture_controls;
HBox* playback_controls;
2017-07-01 12:42:24 -04:00
Button* b;
Label* l;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
vpacker = manage (new VBox);
vpacker->set_spacing (6);
vpacker->set_border_width (12);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
l = manage (new Label (string_compose ("<span size=\"large\" weight=\"bold\">%1</span>", _("Inbound"))));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
l->set_use_markup (true);
2017-07-01 12:42:24 -04:00
vpacker->pack_start (*l, true, true);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
vpacker->pack_start (capture_all_button);
capture_all_button.signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::capture_mode_toggled), AllChannels));
2015-10-05 10:17:49 -04:00
vpacker->pack_start (capture_filter_button);
capture_filter_button.signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::capture_mode_toggled), FilterChannels));
2015-10-05 10:17:49 -04:00
vpacker->pack_start (capture_force_button);
capture_force_button.signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::capture_mode_toggled), ForceChannel));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
vpacker->pack_start (capture_mask_box);
2015-10-05 10:17:49 -04:00
capture_controls = manage (new HBox);
capture_controls->set_spacing (6);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
b = manage (new Button (_("All")));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
Gtkmm2ext::UI::instance()->set_tip (*b, _("Click to enable recording all channels"));
capture_controls->pack_start (*b);
capture_mask_controls.push_back (b);
b->signal_clicked().connect (sigc::mem_fun (*this, &MidiChannelSelectorWindow::fill_capture_mask));
2017-07-01 12:42:24 -04:00
b = manage (new Button (_("None")));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
Gtkmm2ext::UI::instance()->set_tip (*b, _("Click to disable recording all channels"));
capture_controls->pack_start (*b);
capture_mask_controls.push_back (b);
b->signal_clicked().connect (sigc::mem_fun (*this, &MidiChannelSelectorWindow::zero_capture_mask));
2017-07-01 12:42:24 -04:00
b = manage (new Button (_("Invert")));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
Gtkmm2ext::UI::instance()->set_tip (*b, _("Click to invert currently selected recording channels"));
capture_controls->pack_start (*b);
capture_mask_controls.push_back (b);
b->signal_clicked().connect (sigc::mem_fun (*this, &MidiChannelSelectorWindow::invert_capture_mask));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
vpacker->pack_start (*capture_controls);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-02-02 22:44:31 -05:00
Gtk::HSeparator *hseparator2 = manage(new Gtk::HSeparator);
vpacker->pack_start (*hseparator2, false, false, 6);
2017-07-01 12:42:24 -04:00
l = manage (new Label (string_compose ("<span size=\"large\" weight=\"bold\">%1</span>", _("Playback"))));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
l->set_use_markup (true);
2017-07-01 12:42:24 -04:00
vpacker->pack_start (*l);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
vpacker->pack_start (playback_all_button);
playback_all_button.signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::playback_mode_toggled), AllChannels));
2015-10-05 10:17:49 -04:00
vpacker->pack_start (playback_filter_button);
playback_filter_button.signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::playback_mode_toggled), FilterChannels));
2015-10-05 10:17:49 -04:00
vpacker->pack_start (playback_force_button);
playback_force_button.signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::playback_mode_toggled), ForceChannel));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
vpacker->pack_start (playback_mask_box);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
playback_controls = manage (new HBox);
playback_controls->set_spacing (6);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
b = manage (new Button (_("All")));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
Gtkmm2ext::UI::instance()->set_tip (*b, _("Click to enable playback of all channels"));
playback_controls->pack_start (*b);
playback_mask_controls.push_back (b);
b->signal_clicked().connect (sigc::mem_fun (*this, &MidiChannelSelectorWindow::fill_playback_mask));
2017-07-01 12:42:24 -04:00
b = manage (new Button (_("None")));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
Gtkmm2ext::UI::instance()->set_tip (*b, _("Click to disable playback of all channels"));
playback_controls->pack_start (*b);
playback_mask_controls.push_back (b);
b->signal_clicked().connect (sigc::mem_fun (*this, &MidiChannelSelectorWindow::zero_playback_mask));
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
b = manage (new Button (_("Invert")));
Gtkmm2ext::UI::instance()->set_tip (*b, _("Click to invert current selected playback channels"));
playback_controls->pack_start (*b);
playback_mask_controls.push_back (b);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
b->signal_clicked().connect (sigc::mem_fun (*this, &MidiChannelSelectorWindow::invert_playback_mask));
2017-07-01 12:42:24 -04:00
vpacker->pack_start (*playback_controls);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
2017-07-01 12:42:24 -04:00
add (*vpacker);
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::fill_playback_mask ()
{
if (track->get_playback_channel_mode() == FilterChannels) {
track->set_playback_channel_mask (0xffff);
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::zero_playback_mask ()
{
if (track->get_playback_channel_mode() == FilterChannels) {
track->set_playback_channel_mask (0);
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::invert_playback_mask ()
{
if (track->get_playback_channel_mode() == FilterChannels) {
track->set_playback_channel_mask (~track->get_playback_channel_mask());
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::fill_capture_mask ()
{
if (track->get_capture_channel_mode() == FilterChannels) {
track->set_capture_channel_mask (0xffff);
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::zero_capture_mask ()
{
if (track->get_capture_channel_mode() == FilterChannels) {
track->set_capture_channel_mask (0);
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::invert_capture_mask ()
{
if (track->get_capture_channel_mode() == FilterChannels) {
track->set_capture_channel_mask (~track->get_capture_channel_mask());
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
2015-10-05 10:17:49 -04:00
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
void
MidiChannelSelectorWindow::set_playback_selected_channels (uint16_t mask)
{
switch (track->get_playback_channel_mode()) {
case AllChannels:
/* they are insensitive, so we don't care */
break;
case FilterChannels:
for (uint16_t i = 0; i < 16; i++) {
playback_buttons[i]->set_active ((1<<i) & mask);
}
break;
2015-10-05 10:17:49 -04:00
case ForceChannel:
/* only set the lowest set channel in the mask as active */
for (uint16_t i = 0; i < 16; i++) {
2013-07-19 04:40:50 -04:00
playback_buttons[i]->set_active (i == (PBD::ffs (mask) - 1));
}
break;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
}
void
MidiChannelSelectorWindow::set_capture_selected_channels (uint16_t mask)
{
switch (track->get_capture_channel_mode()) {
case AllChannels:
/* they are insensitive, so we don't care */
break;
case FilterChannels:
for (uint16_t i = 0; i < 16; i++) {
capture_buttons[i]->set_active ((1<<i) & mask);
}
break;
2015-10-05 10:17:49 -04:00
case ForceChannel:
/* only set the lowest set channel in the mask as active */
for (uint16_t i = 0; i < 16; i++) {
2013-07-19 04:40:50 -04:00
capture_buttons[i]->set_active (i == (PBD::ffs (mask) - 1));
}
break;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
}
void
MidiChannelSelectorWindow::playback_mask_changed ()
{
set_playback_selected_channels (track->get_playback_channel_mask());
}
void
MidiChannelSelectorWindow::capture_mask_changed ()
{
set_capture_selected_channels (track->get_capture_channel_mask());
}
void
MidiChannelSelectorWindow::playback_mode_changed ()
{
uint32_t first_channel = 0;
ChannelMode mode = track->get_playback_channel_mode();
switch (mode) {
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
case AllChannels:
if (last_drawn_playback_mode == ForceChannel) {
/* force mode used radio buttons. not what we want,
* though one could argue that we want no buttons
* at since they are insensitive
*/
playback_buttons.clear ();
}
for (vector<Widget*>::iterator i = playback_mask_controls.begin(); i != playback_mask_controls.end(); ++i) {
(*i)->set_sensitive (false);
}
playback_all_button.set_active ();
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
break;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
case FilterChannels:
if (last_drawn_playback_mode == ForceChannel) {
playback_buttons.clear ();
} else if (last_drawn_playback_mode == AllChannels) {
for (vector<ToggleButton*>::iterator i = playback_buttons.begin(); i != playback_buttons.end(); ++i) {
(*i)->set_sensitive (true);
}
}
for (vector<Widget*>::iterator i = playback_mask_controls.begin(); i != playback_mask_controls.end(); ++i) {
(*i)->set_sensitive (true);
}
playback_filter_button.set_active ();
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
break;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
case ForceChannel:
if (last_drawn_playback_mode == AllChannels || last_drawn_playback_mode == FilterChannels) {
playback_buttons.clear ();
2013-07-19 04:40:50 -04:00
first_channel = PBD::ffs (track->get_playback_channel_mask()) - 1;
}
for (vector<Widget*>::iterator i = playback_mask_controls.begin(); i != playback_mask_controls.end(); ++i) {
(*i)->set_sensitive (false);
}
playback_force_button.set_active ();
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
break;
}
if (playback_buttons.empty()) {
Gtkmm2ext::container_clear (playback_mask_box);
2015-10-05 10:17:49 -04:00
ToggleButton* tb;
RadioButtonGroup group;
2015-10-05 10:17:49 -04:00
for (uint32_t n = 0; n < 16; ++n) {
char buf[3];
snprintf (buf, sizeof (buf), "%d", n+1);
switch (mode) {
case AllChannels:
case FilterChannels:
tb = manage (new ToggleButton (buf));
Gtkmm2ext::UI::instance()->set_tip (*tb, string_compose (_("Click to toggle playback of channel %1"), n+1));
break;
case ForceChannel:
tb = manage (new RadioButton (group, buf));
tb->property_draw_indicator() = false;
if (n == first_channel) {
tb->set_active (true);
}
Gtkmm2ext::UI::instance()->set_tip (*tb, string_compose (_("Click to force all MIDI channel messages to channel %1"), n+1));
break;
}
playback_buttons.push_back (tb);
tb->set_name (X_("MidiChannelSelectorButton"));
playback_mask_box.pack_start (*tb);
tb->signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::playback_channel_clicked), n));
tb->show ();
if (mode == AllChannels) {
tb->set_sensitive (false);
}
}
2015-10-05 10:17:49 -04:00
if (mode != ForceChannel) {
set_playback_selected_channels (track->get_playback_channel_mask());
}
}
if (mode == AllChannels) {
for (vector<ToggleButton*>::iterator i = playback_buttons.begin(); i != playback_buttons.end(); ++i) {
(*i)->set_sensitive (false);
}
}
playback_mask_changed(); // update buttons
last_drawn_playback_mode = mode;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::capture_mode_changed ()
{
uint32_t first_channel = 0;
ChannelMode mode = track->get_capture_channel_mode();
switch (mode) {
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
case AllChannels:
if (last_drawn_capture_mode == ForceChannel) {
/* force mode used radio buttons. not what we want,
* though one could argue that we want no buttons
* at since they are insensitive
*/
capture_buttons.clear ();
}
for (vector<Widget*>::iterator i = capture_mask_controls.begin(); i != capture_mask_controls.end(); ++i) {
(*i)->set_sensitive (false);
}
capture_all_button.set_active ();
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
break;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
case FilterChannels:
if (last_drawn_capture_mode == ForceChannel) {
capture_buttons.clear ();
} else if (last_drawn_capture_mode == AllChannels) {
for (vector<ToggleButton*>::iterator i = capture_buttons.begin(); i != capture_buttons.end(); ++i) {
(*i)->set_sensitive (true);
}
}
for (vector<Widget*>::iterator i = capture_mask_controls.begin(); i != capture_mask_controls.end(); ++i) {
(*i)->set_sensitive (true);
}
capture_filter_button.set_active ();
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
break;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
case ForceChannel:
if (last_drawn_capture_mode == AllChannels || last_drawn_capture_mode == FilterChannels) {
capture_buttons.clear ();
2013-07-19 04:40:50 -04:00
first_channel = PBD::ffs (track->get_capture_channel_mask()) - 1;
}
for (vector<Widget*>::iterator i = capture_mask_controls.begin(); i != capture_mask_controls.end(); ++i) {
(*i)->set_sensitive (false);
}
capture_force_button.set_active ();
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
break;
}
if (capture_buttons.empty()) {
Gtkmm2ext::container_clear (capture_mask_box);
2015-10-05 10:17:49 -04:00
ToggleButton* tb;
RadioButtonGroup group;
2015-10-05 10:17:49 -04:00
for (uint32_t n = 0; n < 16; ++n) {
char buf[3];
snprintf (buf, sizeof (buf), "%d", n+1);
switch (mode) {
case AllChannels:
case FilterChannels:
tb = manage (new ToggleButton (buf));
Gtkmm2ext::UI::instance()->set_tip (*tb, string_compose (_("Click to toggle recording of channel %1"), n+1));
break;
case ForceChannel:
tb = manage (new RadioButton (group, buf));
tb->property_draw_indicator() = false;
if (n == first_channel) {
tb->set_active (true);
}
Gtkmm2ext::UI::instance()->set_tip (*tb, string_compose (_("Click to force all recorded channels to %1"), n+1));
break;
}
capture_buttons.push_back (tb);
tb->set_name (X_("MidiChannelSelectorButton"));
capture_mask_box.pack_start (*tb);
tb->signal_toggled().connect (sigc::bind (sigc::mem_fun (*this, &MidiChannelSelectorWindow::capture_channel_clicked), n));
tb->show ();
if (mode == AllChannels) {
tb->set_sensitive (false);
}
}
2015-10-05 10:17:49 -04:00
if (mode != ForceChannel) {
set_capture_selected_channels (track->get_capture_channel_mask());
}
}
if (mode == AllChannels) {
for (vector<ToggleButton*>::iterator i = capture_buttons.begin(); i != capture_buttons.end(); ++i) {
(*i)->set_sensitive (false);
}
}
capture_mask_changed (); // update buttons
last_drawn_capture_mode = mode;
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
void
MidiChannelSelectorWindow::playback_channel_clicked (uint16_t n)
{
if (playback_buttons[n]->get_active()) {
switch (track->get_playback_channel_mode()) {
case AllChannels:
break;
case FilterChannels:
track->set_playback_channel_mask (track->get_playback_channel_mask() | (1<<n));
break;
case ForceChannel:
track->set_playback_channel_mask (1<<n);
break;
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
} else {
if (track->get_playback_channel_mode() == FilterChannels) {
track->set_playback_channel_mask (track->get_playback_channel_mask() & ~(1<<n));
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
}
void
MidiChannelSelectorWindow::capture_channel_clicked (uint16_t n)
{
if (capture_buttons[n]->get_active()) {
switch (track->get_capture_channel_mode()) {
case AllChannels:
break;
case FilterChannels:
track->set_capture_channel_mask (track->get_capture_channel_mask() | (1<<n));
break;
case ForceChannel:
track->set_capture_channel_mask (1<<n);
break;
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
} else {
if (track->get_capture_channel_mode() == FilterChannels) {
track->set_capture_channel_mask (track->get_capture_channel_mask() & ~(1<<n));
}
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
}
void
MidiChannelSelectorWindow::capture_mode_toggled (ChannelMode mode)
{
/* this is called twice for every radio button change. the first time
is for the button/mode that has been turned off, and the second is for the
button/mode that has been turned on.
so we take action only if the button is active (i.e it is the one
just clicked on)
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
*/
2015-10-05 10:17:49 -04:00
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
switch (mode) {
case AllChannels:
if (capture_all_button.get_active()) {
track->set_capture_channel_mode (AllChannels, track->get_capture_channel_mask());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
break;
case FilterChannels:
if (capture_filter_button.get_active()) {
track->set_capture_channel_mode (FilterChannels, track->get_capture_channel_mask());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
break;
case ForceChannel:
if (capture_force_button.get_active()) {
track->set_capture_channel_mode (ForceChannel, track->get_capture_channel_mask());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
break;
}
}
void
MidiChannelSelectorWindow::playback_mode_toggled (ChannelMode mode)
{
/* this is called twice for every radio button change. the first time
is for the button/mode that has been turned off, and the second is for the
button/mode that has been turned on.
so we take action only if the button is active (i.e it is the one
just clicked on)
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
*/
2015-10-05 10:17:49 -04:00
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
switch (mode) {
case AllChannels:
if (playback_all_button.get_active()) {
track->set_playback_channel_mode (AllChannels, track->get_playback_channel_mask());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
break;
case FilterChannels:
if (playback_filter_button.get_active()) {
track->set_playback_channel_mode (FilterChannels, track->get_playback_channel_mask());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
break;
case ForceChannel:
if (playback_force_button.get_active()) {
track->set_playback_channel_mode (ForceChannel, track->get_playback_channel_mask());
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
}
break;
}
}
void
MidiChannelSelectorWindow::set_channel_colors (const uint32_t new_channel_colors[16])
{
for (uint32_t n = 0; n < 16; ++n) {
char color_normal[8];
char color_active[8];
2015-10-05 10:17:49 -04:00
Squashed commit of the following: commit fdbae82077db53add90df7448a06869dac89acc6 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 21:45:28 2013 -0400 mammoth changes in basic signal flow, total redesign of MIDI channel filtering and more. commit 59343a8283698e02bc0f622313b29e98f449e4c8 Author: Paul Davis <paul@linuxaudiosystems.com> Date: Wed Mar 27 01:58:53 2013 -0400 initial working version after changes to MIDI channel filtering. may affect metering input too. testing not yet finished this commit merges many deep changes in ardour's internal architecture, combined with a total redesign of how MIDI channel filtering works. data in a track used to flow from JACK port buffers to diskstream's ringbuffers and was then copied from the ringbuffers into a BufferSet for use during Route::process_output_buffers(). The butler thread would handle the movement of data between the ringbuffers and disk. with this commit, data now flows from JACK port buffers into the BufferSet used for Route processing, and is copied from the BufferSet into the diskstream's ringbuffers (the butler thread continues to handle interactions with disk as usual). this change allowed a dramatic consolidation of code and simplification of most aspects of Track/Route::roll() and Track/Route::no_roll(). in particular, see Route::fill_buffers_with_input() which now concisely describes how we move data from JACK port buffers into the BufferSet for all Route types (including Tracks). this work was initially motivated by changing MIDI channel filtering so that we can process capture and playback independently. there is now a very clean pathway for this - see MidiTrack::roll() (NOTE: This needs implementing in the no-roll case too - a TODO item). the channel selector for MIDI tracks has been moved out of the track header and is now accessible via the context menu. more work is likely here, to make it (more) obvious to the user when filtering is going on.
2013-03-27 21:50:18 -04:00
snprintf(color_normal, 8, "#%x", UINT_INTERPOLATE(new_channel_colors[n], 0x000000ff, 0.6));
snprintf(color_active, 8, "#%x", new_channel_colors[n]);
playback_buttons[n]->modify_bg(STATE_NORMAL, Gdk::Color(color_normal));
playback_buttons[n]->modify_bg(STATE_ACTIVE, Gdk::Color(color_active));
capture_buttons[n]->modify_bg(STATE_NORMAL, Gdk::Color(color_normal));
capture_buttons[n]->modify_bg(STATE_ACTIVE, Gdk::Color(color_active));
}
}
void
MidiChannelSelectorWindow::set_default_channel_color()
{
for (uint32_t n = 0; n < 16; ++n) {
playback_buttons[n]->unset_fg (STATE_NORMAL);
playback_buttons[n]->unset_bg (STATE_NORMAL);
playback_buttons[n]->unset_fg (STATE_ACTIVE);
playback_buttons[n]->unset_bg (STATE_ACTIVE);
capture_buttons[n]->unset_fg (STATE_NORMAL);
capture_buttons[n]->unset_bg (STATE_NORMAL);
capture_buttons[n]->unset_fg (STATE_ACTIVE);
capture_buttons[n]->unset_bg (STATE_ACTIVE);
}
}