4c13018656
mackie: fix display of send level/fader level in send subview
2016-02-02 08:08:14 -05:00
36b11098a2
mackie: substantial reworking of flip mode with large chunks of code no longer used.
...
Flip mode only works in Sends subview mode.
Display is incorrect when flipped - vpot is still updated by send level changes. TO BE FIXED.
2016-02-01 22:52:22 -05:00
cf29447ec3
mackie: add Phase control (for first channel only) in Track View subview mode.
...
Also removed a couple of methods no longer used, since trim and phase are only
visible in TrackView mode.
2016-02-01 15:15:57 -05:00
55967972b6
mackie: slightly less fragile/more readable code for compute new controllable values from vpot events
...
This is still not really right - it doesn't do the right thing, i think, for trim controls
2016-01-31 22:43:21 -05:00
c66d7e8cf9
mackie: consistent use of Shift to mean "InverseGroup"
2016-01-31 22:42:29 -05:00
de29ed02bc
mackie: display correct numerical send level
2016-01-31 22:41:46 -05:00
20d74585fd
mackie: implement trim, monitoring, solo iso and solo safe for trackview submode
2016-01-31 21:54:01 -05:00
9cfd76c026
mackie: make shift-click use InverseGroup semantics as intended, not NoGroup
2016-01-31 21:53:29 -05:00
23f457e81e
NOOP: comment fix
2016-01-31 21:52:46 -05:00
27b565d5cc
mackie: make vselect events and pot events handle toggle/enumeration controls correctly (or more correctly
2016-01-31 21:52:14 -05:00
69b4228176
mackie: partially working trackview submode.
...
More controls/pots to come
2016-01-31 13:20:18 -05:00
3631cc1532
mackie: remove Trim pot mode, and add skeleton for TrackView subview mode
2016-01-31 13:20:18 -05:00
39a61dba83
mixbus: vpot press in non-subview mode should toggle master bus send
2016-01-29 12:58:50 -05:00
c6ea3515d1
mackie: in Sends subview mode, the enable control for the send should be looked upin the subview route, not the strip's own route
2016-01-29 12:41:50 -05:00
0a2377e9b4
mackie: redesign display logic entirely
...
Strips now maintain a pair of pending display strings (upper and lower).
A periodic timeout writes the pending value to the actual hardware if it
differs from the current string. This new design makes it easy to put a
message on the display and then after some period of time, revert to
whatever was there before.
2016-01-29 12:27:46 -05:00
e862be7300
mackie: use Route::send_name() rather than Route::nth_send()
2016-01-28 23:05:28 -05:00
f1ed01b97f
mackie: fix display of send level value
2016-01-28 23:05:28 -05:00
e63c805fe2
mackie: clean up (some) interactions between subview mode and selection
...
Also, stop Plugin button from doing anything, since it has nothing to do yet
2016-01-27 19:00:27 -05:00
c61e5dbc18
remove debug output
2016-01-27 16:26:50 -05:00
66686a4e2a
mackie: semi-working Sends subview mode
2016-01-27 14:15:41 -05:00
9b2af90328
remove mackie send pot mode (subview mode for sends coming up)
2016-01-27 12:41:01 -05:00
9e5b7db89f
first compiling, mostly working version of group controls changes
2016-01-22 11:58:31 -05:00
5a55ac582d
mackie: shift-fader overrides group settings
2016-01-18 12:11:09 -05:00
c2bf0fc94e
remove shift-fader-touch as a way to reset gain to default
2016-01-18 12:11:09 -05:00
7cbf35a3d6
Mackie Control, Fix sends after monitor not showing.
2016-01-12 08:15:57 -08:00
9e3299f97d
change Controllable::set_value() API to include grouped control consideration.
...
This also removes Route::group_gain_control() and associated machinery.
Not yet tested with Mackie or other surfaces. More work to done to
start using the group capabilities, and also potentially to add
or derive more controls as RouteAutomationControls
2016-01-02 04:58:30 -05:00
85e12e8095
Mackie control: non-existent controls zero pot ring fix.
2015-12-19 11:50:13 -08:00
07e4377d7b
NoOp: removed spaces, replaced with tabs.
2015-12-16 20:41:50 -08:00
82f31fe624
Mackie Control: Re-enable view_mode display and make sure all text vanishes after timeout.
2015-12-16 14:38:21 -08:00
bff1fcbe48
mackie: restore access to trim and pan width control
...
Change from Evoral::Parameter to AutomationType caused this glitch
2015-12-16 11:05:40 -05:00
3b872fb207
fix some merge issues from cherry-picking mackie changes from a mixbus repo
2015-12-16 06:31:06 -05:00
a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
1152bf87a2
make vselect-press in subview mode act as a toggle for toggled controls
2015-12-16 06:01:38 -05:00
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
e3d0de3bf6
mackie: use new route API for universal access to pan/eq/dynamics parameters to provide panning and EQ control
2015-12-16 06:01:20 -05:00
81179389d3
mackie: cleanup subview mode a little
2015-12-16 05:55:10 -05:00
8ba8f1c0b0
fix cherry-pick conflict
2015-12-16 05:54:43 -05:00
a1ef99b9b7
add beginnings of EQ and dynamics control to mackie for mixbus
2015-12-16 05:52:36 -05:00
616e925322
tentative mcu panning for mixbus. hey, it compiles
2015-12-16 05:46:52 -05:00
548989fc75
Fix MCP send display value scaling.
2015-12-08 22:45:59 -08:00
fcf20ee91a
Set vpot to the same range as the fader. Fixes trim from -16 to -20.
2015-12-08 19:30:57 -08:00
bbdd25205d
MCU: fix likely copypaste thinko in mcu panner knobs
2015-12-07 17:31:45 -06:00
fb96170178
Fix fader in mackie control to work with groups.
2015-11-14 10:39:53 -08:00
ace771bc91
Mackie Control: Add send functionality to vpot assign section.
2015-11-06 16:18:13 -08:00
84d44eb5a3
Don't handle possible phase change if no audio channels in mackie control
2015-11-01 19:25:45 -08:00
8ae23c6952
Fix Mackie surface phase control for flip and more than one audio channel.
2015-11-01 15:30:36 -08:00
2e9de2def0
Added Phase control mackie controls as part of the Trim (track) vpot assignment.
2015-11-01 13:35:02 -08:00
7c24957d30
Changed MCP trim detection to match method used in GUI.
2015-10-25 08:22:02 -07:00
f7e3117c3b
Only display Trim for tracks that have Trim. On the way:
...
-fixed flip mode.
-fixed no controlable for vpot or fader
2015-10-18 07:38:40 -07:00
53a28c230a
mackie support omnibus patch
...
Fixes all kinds of miscellaneous issues with MCP. Also removes several theoretical pan modes, replace "Tracks"
pan mode with "Trim", and takes a tiny step towards view modes
2015-10-13 15:34:53 -04:00
